เครื่องปรับแต่งความถี่สัญญาณเสียง DBX iEQ31 Equalizers อีคลอไลเซอร์ Dual Channel 31 Band
DBX iEQ31
Dual 31-Band Graphic EQ/Limiter with Type V™ NR and AFS®
dbx iEQ Series : Graphic EQ with Noise Reduction, AFS™ and Limiter เป็นความต่อเนื่องยาวนานมากว่า 30 ปีที่ dbx ได้ผลิต EQ ระดับมาตรฐานสู่ท้องตลาด และล่าสุดคือตระกูล iEQ ที่บรรจุฟังก์ชั่นการทำงานต่างๆ ไว้อย่างครบถ้วนเช่น AFS™ วงจรป้องกันเสียงหอน, วงจรขจัดสัญญาณรบกวน Type V™ และ Peak Stop Plus™ Limiter ในขณะที่รูปลักษณ์ภายนอกและการปรับแต่งยังคงเป็นรูปแบบ Analog ที่ทุกคนคุ้นเคย แต่วงจรภายใน iEQ เป็นระบบ Digital ที่ออกแบบมาให้มีประสิทธิภาพสูงสุด ปุ่มสไลด์เดอร์ก็ผลิตจากวัสดุประเภท Nylon ที่มีความทนทานสูง และยังมีฟังก์ชั่น Lock-Out Front Panel ที่จะทำให้บุคคลอื่นไม่สามารถปรับแต่ง EQ จากหน้าเครื่องได้
With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx® legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4” and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.
-
Advanced Feedback Suppression (AFS™)
-
Type V™ Noise Reduction
-
PeakStopPlus® Limiting
-
1/3-octave Constant Q frequency bands
-
Switchable boost/cut ranges of +6 or +15dB
-
18 dB per octave 40Hz low-cut filter
-
+12dB input gain range
-
XLR, TRS and Euroblock Inputs and Outputs
-
Internal Toroidal Transformer
-
Dyanmic range of greater than 113dB
-
User Power Up Features
-
Relay Bypass for Power Failure System Protection
Input Connectors |
1/4″ TRS, female XLR (pin 2 hot), and Euroblock |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Insert Impedance |
Balanced 40k ohm, unbalanced 20k ohm |
Max Input |
>+22dBu balanced or unbalanced |
CMRR |
>40dB, typically >55dB at 1kHz |
Output Connectors |
1/4″ TRS, male XLR (pin 2 hot), and Euroblock |
Output Type |
Active-balanaced/unbalanced, RF filtered |
Output Impedance |
Balanced >120 ohm, unbalanced >60 ohm |
Max Output |
>+20dBu balanced/unbalanced into 2k ohm or greater |
Frequency Response |
20Hz to 20kHz, +0.5/0.25dB |
Dynamic Range |
>113dB, “A” weighted |
THD+Noise |
<0.003%, typical at +4dBu, 1kHz |
Interchannel Crosstalk |
<-80dB, 20Hz to 20kHz |
Noise Reduction |
Up to 10dB of dynamic broadband noise reduction |
Digital Resolution |
24 bits |
Sample Rate |
48kHz |
Latency |
2msec |
Operating Voltage |
120VAC 60Hz, 220/240VAC 50/60Hz |
Power Consumption |
17 Watts |
Power Connector |
IEC receptacle |
Dimensions |
3.5″ H x 19″ W x 7.9″ D |