FOCUSRITE RedNet X2P แอมป์หูฟัง 2×2 Analogue I/O With 2x Mic Pres, Headphone And Line Output

฿70,000 (รวม VAT 7% แล้ว)

  • เช็ค Stock และราคาสินค้า กับเจ้าหน้าที่ก่อนสั่งซื้อทุกครั้ง
  • รับสินค้าภายใน 3 - 7 วัน (ขึ้นอยู่กับที่อยู่จัดส่งของลูกค้า)
  • สงวนสิทธิ์การเปลี่ยนแปลงข้อมูล ราคา ไม่แจ้งให้ทราบล่วงหน้า
  • สงวนสิทธิ์การรับผิดชอบเนื่องจากการพิมพ์ผิดพลาดต่างๆ

แอมป์หูฟัง FOCUSRITE RedNet X2P 2×2 Analogue I/O With 2x Mic Pres, Headphone And Line Output, Up to 24-bit, 96kHz sampling rates จากแบรนด์ FOCUSRITE

FOCUSRITE RedNet X2P
2×2 Analogue I/O With 2x Mic Pres, Headphone And Line Output, PoE Supplied

RedNet X2P is a compact, portable and robust 2×2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable – simply use a power over Ethernet switch or PoE injector. A local input mixer allows ‘more me’ monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.

Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4″ connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4″ inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite’s acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.

คุณสมบัติ

  • Stereo 2×2 audio interface for Dante Audio-over-IP networks
  • Two Red Evolution mic preamps for mic, line or instrument level inputs
  • Power-over-Ethernet supplied: IEEE 802.3af compliant
  • Up to 24-bit, 96kHz sampling rates
  • Robust steel and aluminium chassis
  • Local input mix to allow ‘more-me’ style monitoring for easy foldback control
  • Powerful headphone output even with high-impedance headphones
  • Local control lockout of mic pre settings, output settings or both
  • Up to 24dBu line output levels
  • Independent level control of headphone and line outputs
  • Mute switch for line output
  • Mic stand mount
  • Kensington security slot
  • Integrated network switch allowing daisy-chaining of network devices
  • Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
  • AES67 compliant
น้ำหนัก 1.04 กก.
ขนาด 104 × 140 × 47.5 มิลลิเมตร
ยี่ห้อ

สเปค

SPECIFICATIONS

MICROPHONE/ LINE INPUTS


  • Gain Range
    0dB to 68dB in 1dB steps
  • Type
    Electronically Balanced, Zin = 6.2kO
  • Max. Input Level
    >+24dBu, min gain
  • Frequency Response
    20Hz – 35kHz ±0.1dB
  • THD + N
    -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)
  • EIN
    <-130dBu ‘A’-Weighted (typical)
  • Signal-To-Noise Ratio
    -120dB ‘A’-Weighted (typical), min gain
  • Common-Mode Rejection Ratio
    50/60Hz CMRR: -80dB
  • Phantom Power
    +48V, independently switchable per channel.
  • HPF
    High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
  • Air Mode
    2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO

INSTRUMENT INPUTS


  • Instrument Inputs Gain Range
    0dB to 68dB in 1dB steps
  • Instrument Inputs Type
    Electronically Balanced, Zin = 2MO
  • Instrument Inputs Max. Input Level
    >+15dBu, min gain
  • Instrument Inputs Frequency Response
    20Hz – 35kHz ±0.1dB
  • Instrument Inputs THD + N
    <-100dB (0.001%) @ -1dBFS (@ 16dB Gain)
  • Instrument Inputs Signal-To-Noise Ratio
    -118dB ‘A’-Weighted (typical), min gain
  • Instrument Inputs HPF
    High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel

LINE LEVEL OUTPUTS


  • Line Level Outputs 0 DBFS Reference Levels
    +18 or +24dBu (switchable)
  • Line Level Outputs Frequency Response
    20Hz – 35kHz ±0.1dB
  • Line Level Outputs THD + N
    <-104dB (0.0006%) @ -1dBFS
  • Line Level Outputs Dynamic Range
    -120dB ‘A’-Weighted (typical), 20Hz – 20kHz

HEADPHONE OUTPUT


  • Headphone Output 0 DBFS Reference Levels
    >+19dBm
  • Headphone Output Frequency Response
    20Hz – 20kHz ±0.2dB
  • Headphone Output THD + N
    <-103dB (0.0007%) @ -1dBFS
  • Headphone Output Dynamic Range
    117dB ‘A’-weighted (typical), 20Hz – 20kHz
  • Headphone Output Impedance
    5O
  • Headphone Impedance
    32O – 600O

MICROPHONE/ LINE CROSSTALK


  • Mic/Line Input To Input
    < -72dB; 20Hz – 20kHz (driven channel at -20dBFS)
  • Mic/Line Input To Output
    < -126dB; 20Hz – 20kHz (driven channel at -20dBFS)
  • Output To Mic/Line Input
    < -159dB; 20Hz – 20kHz (driven channel at -20dBFS)

OUTPUT CROSSTALK


  • Output To Output
    < -101dB; 20Hz – 20kHz (driven channel at -20dBFS)

HEADPHONE CROSSTALK


  • Right To Left
    < -85dB; 20Hz – 20kHz (driven channel at -20dBFS)

DIGITAL PERFORMANCE


  • Supported Sample Rates
    44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
  • Clock Sources
    Internal or from Dante Network Master.

FRONT PANEL CONNECTIVITY


  1. Outputs Headphone Outputs
    1 x 1/4″ stereo jack

REAR PANEL CONNECTIVITY


  1. Inputs Mic/Line/Inst Inputs
    2 x Locking Combi XLR
  1. Outputs Line Outputs
    2 x Male XLR

PSU & NETWORK CONNECTIONS


  • PSU (PoE And DC)
    1 x PoE (Port 1) Input and 1 x DC 12V Locking Barrel Input Connector.
  • Network
    2 x etherCON connectors, also compatible with standard RJ45 connectors.

TOP PANEL INDICATORS


  • LCD Screen
    1 x Screen (Status & Metering)

DIMENSIONS


  • Height (Chassis Only)
    47.5mm/ 1.87″
  • Width
    140mm/ 5.51″
  • Depth (Chassis Only)
    104mm/ 4.09″

WEIGHT


  • Weight
    1.04kg

POWER


Power Over Ethernet (PoE)
Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)

DC Power Supply
1 x 12V 1.2A DC Power Supply.

Power Consumption
PoE: 11.0W – DC: 13.32W (When using supplied DC PSU)

HEAT PERFORMANCE


Operating Temperature
Operates at up to an ambient temperature of 45 degrees Celcius

ดาวน์โหลด

คู่มือ
รหัสสินค้า: FOCUSRITE RedNet X2P หมวดหมู่: , , ป้ายกำกับ:
฿2,400 (รวม VAT 7% แล้ว)
สีขาว
สีดำ
สีดำขาว
฿9,000 (รวม VAT 7% แล้ว)
-25%
฿6,450 (รวม VAT 7% แล้ว)
-17%
สีเทา
สีดำ
สีน้ำตาล
สีน้ำเงิน
฿4,990 (รวม VAT 7% แล้ว)
฿1,850 (รวม VAT 7% แล้ว)
New
สีขาว
สีดำ
฿2,990 (รวม VAT 7% แล้ว)
RedNet X2P-01
FOCUSRITE RedNet X2P แอมป์หูฟัง 2×2 Analogue I/O With 2x Mic Pres, Headphone And Line Output

เราใช้คุกกี้เพื่อพัฒนาประสิทธิภาพ และประสบการณ์ที่ดีในการใช้เว็บไซต์ของคุณ คุณสามารถศึกษารายละเอียดได้ที่ นโยบายความเป็นส่วนตัว และสามารถจัดการความเป็นส่วนตัวเองได้ของคุณได้เองโดยคลิกที่ ตั้งค่าคุกกี้

ตั้งค่าความเป็นส่วนตัว

คุณสามารถเลือกการตั้งค่าคุกกี้โดยเปิด/ปิด คุกกี้ในแต่ละประเภทได้ตามความต้องการ ยกเว้น คุกกี้ที่จำเป็น

ยอมรับทั้งหมด
จัดการความเป็นส่วนตัว
  • คุกกี้ที่จำเป็น
    เปิดใช้งานตลอด

    ประเภทของคุกกี้มีความจำเป็นสำหรับการทำงานของเว็บไซต์ เพื่อให้คุณสามารถใช้ได้อย่างเป็นปกติ และเข้าชมเว็บไซต์ คุณไม่สามารถปิดการทำงานของคุกกี้นี้ในระบบเว็บไซต์ของเราได้
    รายละเอียดคุกกี้

  • คุกกี้เพื่อการวิเคราะห์

    คุกกี้ประเภทนี้จะทำการเก็บข้อมูลการใช้งานเว็บไซต์ของคุณ เพื่อเป็นประโยชน์ในการวัดผล ปรับปรุง และพัฒนาประสบการณ์ที่ดีในการใช้งานเว็บไซต์ ถ้าหากท่านไม่ยินยอมให้เราใช้คุกกี้นี้ เราจะไม่สามารถวัดผล ปรับปรุงและพัฒนาเว็บไซต์ได้
    รายละเอียดคุกกี้

บันทึก