JBL Control 85M ลำโพงสนามหญ้า 2 ทาง ขนาด 5.25 นิ้ว 80 วัตต์

฿11,900 (รวม VAT 7% แล้ว)

ราคาต่อใบ

เช็ค Stock และราคาสินค้า กับเจ้าหน้าที่ก่อนสั่งซื้อทุกครั้ง
รับสินค้าภายใน 3 - 7 วัน (ขึ้นอยู่กับที่อยู่จัดส่งของลูกค้า)

สงวนสิทธิ์การเปลี่ยนแปลงข้อมูล ราคา ไม่แจ้งให้ทราบล่วงหน้า
สงวนสิทธิ์การรับผิดชอบเนื่องจากการพิมพ์ผิดพลาดต่างๆ

JBL Control 85M ลำโพงสนามหญ้า 2 ทาง ขนาด 5.25 นิ้ว 80 วัตต์ Control 85M Mushroom Landscape Speaker จากแบรนด์ JBL

JBL Control 85M

Two-Way 5.25 inch (135mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

คุณสมบัติ

Components:
• 5¼” highly weather-resistant driver
• ¾” soft-dome highly weather-resistant tweeter
80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer
Tough polyethylene highly weather resistant enclosure
Fully isolated center chamber for wiring protection
High fidelity sound character with broad frequency range of 55Hz – 18kHz

น้ำหนัก	7.2 กก.
ขนาด	291 × 291 × 432 มิลลิเมตร
ยี่ห้อ	JBL

ดาวน์โหลด

สเปค

	Frequency Response (-10dB)	55 Hz – 18 kHz
	Power Rating	160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs)
	Transformer Taps	70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W
	Frequency Response (±3 dB)	65Hz – 16 kHz
	Maximum Input Voltage	23.3 V
	Sensitivity	86 dB, 1W @ 1m (ave. 80Hz – 16kHz)
	Nominal Coverage Angle	360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
	Directivity (Q)	2.2
	Directivity Index (DI)	3.4 dB
	Maximum SPL	105 dB @ 1m
	Nominal Impedance	8Ω (at 8Ω setting)
	Insertion Loss	<1.0 dB at any tap setting
	Thru Setting	8Ω nominal
	Crossover Type	2nd Order LPF on LF and 2nd Order HPF on HF
	Recommended Protective High-Pass	65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
	Low Frequency Driver	135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
	High Frequency	19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
	Enclosure Material	LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
	Grille	Powder coated stainless steel.
	Environmental	IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
	Agency Ratings	UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
	Terminals	Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
	Wiring	Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).
	Colors	Hunter Green, RAL6018
	Dimensions (H x W x D)	432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
	Net Weight	5.5 kg (12 lb)
	Shipping Weight	7.3 kg (16 lb)
	Included Accessories	(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
	Installer-Supplied Required Tools	22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.