KANEXPRO MOD-IN-CAT6-4K 4-Input HDBaseT card for Modular matrix with 4K
KANEXPRO MOD-IN-CAT6-4K เครื่องสลับสัญญาณแมททริค แบบ HDBaseT card 4 อินพุท (3D,1080p,4Kx2K) MOD-IN-CAT6-4K เครื่องสลับสัญญาณ จากแบรนด์ KANEXPRO
Add 4-Input HDBaseT Card w/ 4K UHD to an MMX Switcher
The KanexPro MOD-IN-CAT6-4K is a 4K compliant, 4-Input card designed to work with the HDMMX Modular matrix switchers. It connects sources from remote locations, from up to 230 feet (70m) away, to be routed to any of the available outputs utilizing standard Cat 5e/6 cable with a TIA-568B
The RS232 connections for each input allow bi-directional control signals at the equipment rack to interface with source equipment when used with the HDBASE70POET transmitters.
Applications:
Ideally designed to work with the extension of long HDMI runs over cost-effective CAT5e/6 cable to remotely control source and destination devices.
- 4-Input HDBaseT card for MMX modular matrix switchers
- Provisions 4K UHD resolutions
- Supported resolutions: 4Kx2K, 1920×1200, 1080p & 3D
- Extend up to 230 feet (70m) over single CAT6 Shielded Twisted Pair
- High bandwidth up to 10.2 Gbps
- Built-in audio embedding
- Built-in EDID management
- Supports DVI/ HDMI signals
- Bi-directional RS-232 control
- HDCP 1.4 compliant
- Supports HDBaseT Specifications; HDMI and HDCP compliance
- Can be used with HDBASE70POET Transmitter Extender
I/O Connections |
|
| HDBaseT Port | Four (4) 8P8C port (Shielded RJ45) |
| Audio In | Four (4) 3.5 mm TRS |
| RS232 | Four (4) 3 pole Phoenix Connectors |
| Control | RS232 pass though; RS232 port ID selectable for cascading; |
Supported Audio, Video and Control |
|
| Maximum Video Compatibilityat 70 m | Aluminum chassis |
| Maximum Video Compatibilityat 40 m | Standard Rack size, provide removable ears for mounting under table, or on wall |
| Video Compliance | HDMI and HDCP |
| Embedded Audio | Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio |
| IR Carrier Frequency Range | 33-55kHz at 5 volts |
| RS232 Baud Rate | Up to 115200 baud |
HDBaseT Signal Characteristics |
|
| Maximum Distance | 230 feet (70 m) |
| Cable Requirements | Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern |
| Bandwidth | 10.2Gbps |
| Gain | 0 dB – 10 dB at 100 MHz |
| Resolution Range | 800×600 – 1920×1200, 4Kx2K |
| Signal to Noise Ratio (SNR) | > 70 dB at 100 MHz over 100 m |
| Return Loss | <-30 dB at 5 KHz |
| Total Harmonic Distortion (THD) | < 0.005% at 1 KHz |
| Min-Max Signal Level | < 0.3 V – 1.45 Vp-p |
| Differential Phase Error | ?10? at 135 MHz over 100 m |
Chassis and Environmental |
|
| Construction | Thumbscrew card with keyed black metal plate |
| Shipping Weight | 0.43 kg (0.95 lbs.) |
| Operating Temperature | 0? to +40? C (+32? to +104? F) |
| Operating Humidity | 20% to 90%, Non-condensing |
Other |
|
| Warranty | 3 years Parts & Labor |
| Matrix Switcher Compatibility | HDMMX88-4K, HDMMX1616-4K, HDMMX3232-4K, HDMMX6464-4K |
| HDBaseT Transmitter (A/V and Control) Compatibility | HDBASE7OPOET |
