QSC ISA500Ti เพาเวอร์แอมป์ลายน์ 70V/100V คลาส AB 500 วัตต์ QSC ISA500Ti เพาเวอร์แอมป์ ขยายเสียง จากแบรนด์ QSC
QSC ISA500Ti
Commercial Power Amplifier
ISA amplifiers are an ideal, cost-effective solution for fixed installation applications requiring low impedance or distributed loudspeakers.
There are seven models in the line, four low impedance models (ISA 280, ISA 450, ISA 750, ISA 1350) rated down to 2-ohm loads and three “Ti” versions (ISA 300Ti, ISA 500Ti, ISA 800Ti) featuring isolated transformers for 25, 70 and 100 volt distributed audio systems.
The DataPort V2 Lite connection facilitates the use of amplifier accessories (XC-3, LF-3 and SF-3.) providing economical crossover and subwoofer filtering solutions.
คลิกที่ภาพ เพื่อขยาย
คุณสมบัติ
-
Low-impedance outputs plus isolated 25, 70, and 100 volt outputs for distributed audio systems
-
Rear panel gain controls for tamper resistance; 2-dB detents allow for quick and repeatable settings
-
XLR and detachable Euro-style input connectors
-
DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
-
Independent defeatable clip limiters for reduced distortion
-
Selectable high-pass filters (50 Hz or 75 Hz) protect speakers and prevent speaker transformer saturation, with minimal effect on program material
-
Front panel indicators include power, signal, and clip
-
Covered barrier strip output connectors for safety agency compliance
-
Automatic on-demand variable-speed fan: quiet normal operation, with maximum cooling when needed
-
Rear-to-front air flow helps keep equipment racks cool
-
Stereo, bridge, or parallel operating modes
-
Comprehensive protection circuitry including DC, infrasonic, thermal overload, and short circuit protection
-
3-year warranty plus optional 3-year extended service contract
สเปค
SPECIFICATIONS |
ISA280 |
ISA450 |
ISA750 |
ISA1350 |
ISA300Ti |
ISA500Ti |
ISA800Ti |
OUTPUT POWER PER CHANNEL, STEREO MODE, both channels driven | |||||||
8Ω, 20 Hz–20 kHz 0.1% THD
|
185 W 280 W 430 W |
260 W 425 W 700 W |
450 W 650 W 1200 W |
800 W 1300 W 2000 W |
185 W 280 W 430 W |
260 W 425 W 700 W |
450 W 650 W 1200 W |
DIRECT POWER PER CHANNEL, STEREO MODE | |||||||
70V, 20 Hz–20 kHz +0/-0.3 dB 0.5% THD | – | – | – | 1500 W | – | – | – |
TRANSFORMER-ISOLATED OUTPUT POWER PER CHANNEL, STEREO MODE | |||||||
70V or 100V, 50 Hz–16 kHz 0.5% THD 25V, 50 Hz–16 kHz 0.5% THD |
– – |
– – |
– – |
– – |
300 W 200 W |
500 W 300 W |
800 W 500 W |
OUTPUT POWER, BRIDGED MONO MODE | |||||||
8Ω, 1 kHz 0.1% THD 4Ω 1 kHz 1% THD |
600 W 830 W |
900 W 1400 W |
1500 W 2400 W |
2800 W 4000 W |
600 W 830 W |
900 W 1400 W |
1500 W 2400 W |
TRANSFORMER-ISOLATED OUTPUT POWER, BRIDGED MONO MODE | |||||||
140V or 200V, 50 Hz-16 kHz 0.5% THD | – | – | – | – | 600 W | 1000 W | 1600 W |
Signal to Noise (20 Hz-20 kHz) | 100 dB | ||||||
Distortion (SMPTE-IM) | Less than 0.01% | Less than 0.01% | Less than 0.02% | Less than 0.01% | Less than 0.01% | Less than 0.01% | Less than 0.02% |
Input Sensitivity @ 8 ohms | 1.15 V (+3.4 dBu) |
1.07 V (+2.8 dBu) |
1.07 V (+2.8 dBu) |
1.24 V (+4.1 dBu) |
1.15 V (+3.4 dBu) |
1.07 V (+2.8 dBu) |
1.07 V (+2.8 dBu) |
Maximum Voltage Gain | 33.4× (30.5 dB) |
44.7× (33 dB) |
56.2× (35 dB) |
64.0× (36.1 dB) |
33.4× (30.5 dB) |
44.7× (33 dB) |
56.2× (35 dB) |
Output Circuitry | Class AB | Class AB | Class H, 2 tier | Class H, 3 tier | Class AB | Class AB | Class H, 2 tier |
THX Approved | – | Yes | Yes | – | – | – | – |
Weight – Net | 36 lb (16.3 kg) |
42 lb (19 kg) |
47 lb (21.3 kg) |
68 lb (30.8 kg) |
44 lb (20.0 kg) |
49 lb (22.3 kg) |
57 lb (26 kg) |
Weight – Shipping | 42 lb (19.1 kg) |
48 lb (22 kg) |
53 lb (24.0 kg) |
77 lb (34.4 kg) |
50 lb (22.7 kg) |
55 lb (25 kg) |
63 lb (28.6 kg) |
ALL MODELS |
|||||||
Distortion (Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power |
Less than 0.03% THD, 4 ohms and 8 ohms
Less than 0.03% THD, 4 ohms and 8 ohms |
||||||
Frequency Response 10 dB below rated output power |
ISA 280, 450, 750 and 1350: 20 Hz–20 kHz, +0/-1 dB; -3 dB points: 5 Hz and 50 kHz |
ISA 300Ti, 500Ti and 800Ti: Direct outputs: -3 dB @ 50 Hz, -0.5 dB @ 20 kHz; XF outputs: 50 Hz–16 kHz, +1/-3 dB |
|||||
Damping Factor with 8Ω Load (direct outputs) | Greater than 200; ISA 1350 greater than 250 | ||||||
Output Regulation (isolated outputs) | Less than 1.5 dB | ||||||
Input Impedance | 10 kΩ unbalanced, 20 kΩ balanced | ||||||
Input Clipping | 10 V rms (+22 dBu) | ||||||
Cooling | Continuously variable speed fan, back-to-front air flow | ||||||
Connectors, each channel | Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+) Output: Covered barrier strips DataPort V2: HD-15 connector |
||||||
Controls | Front: AC switch Rear: Ch. 1 and Ch. 2 gain knobs, 10-position DIP switch |
||||||
Indicators | PWR-ON: Green LED; SIGNAL: Green LED (1 per channel); CLIP: Red LED (1 per channel) |
||||||
Dimensions (HWD) inches | 5.25 x 19 x 15.9 / 3RU | ||||||
Dimensions (HWD) mm | 133 x 483 x 400 / 3RU | ||||||
Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection; Stable into reactive or mismatched loads |
||||||
Power Requirements | 120 or 230 VAC, 50–60 Hz | ||||||
Load Protection | On/off muting; Triac crowbar: ISA 750, 1350, and 800Ti; AC coupling: ISA 280, 300Ti, 450, and 500Ti |
รีวิว
ยังไม่มีบทวิจารณ์