RODE VideoMic Rycote ไมโครโฟน Shotgun ขนาดเล็ก รับเสียงแบบ Directional Condenser สำหรับกล้อง DSLR,
RODE VideoMic Rycote
Directional On-camera Microphone
RODE VideoMic Rycote ไมโครโฟนที่มีรูปแบบการรับเสียงแบบคาร์ดิออยด์ ได้ถูกผลิตขึ้นมาอย่างพิถีพิถันตัวไมค์ผลิตจากอลูมิเนียม ลดเสียงรบกวนได้ดี โดยมีไมโครโฟนรับเสียงขนาดเล็กบรรจุไว้ภายใน เหมาะสำหรับเป็นผู้ช่วยที่ทำให้งานบันทึกวีดีโอของคุณ จากกล้องวีดีโอ มีคุณภาพเสียงระดับงานโปรเฟสชั่นนอล จากแบรนด์ RODE
The RØDE VideoMic is a professional grade 1/2″ condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.
The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Its standard sized shoe mount also includes a 3/8″ thread in the base for easy mounting on a boom pole or stand.
By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
In addition to the microphone’s native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.
The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones’ industry leading 10 year warranty.
-
Studio recording quality
-
Condenser microphone
-
Super-cardioid polar pattern
-
9V battery power
-
Integrated Rycote® Lyre® shock mounting
-
Two step High Pass Filter (Flat/80Hz)
-
Three step PAD (0, -10, -20dB)
-
Rugged reinforced ABS construction
-
Windshield included
-
3.5mm mini-jack output
-
Integrated cold-shoe mount (3/8” thread)
Acoustic Principle |
Line Gradient |
Active Electronics |
JFET impedance converter |
Capsule |
0.50″ |
Polar Pattern |
Supercardioid-Picks up the front and sides and rejects 150C to the rear |
Address Type |
End |
Frequency Range |
40Hz – 20kHz |
Output Impedance |
200Ω |
Maximum SPL |
134dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity |
-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
20dB-A |
Power Options |
9V battery power |
Weight |
176.00gm |
Dimensions |
65.00mmH x 102.00mmW x 250.00mmD |
Output |
Minijake/3.5mm output |
- Camera
– VideoMic : Directional On-camera Microphone 1 ตัว