ไมโครโฟน Shotgun SARAMONIC SoundBird T3 สำหรับติดกล้อง รับเสียงแบบ Directional Condenser แบตเตอรี่ในตัวรองรับการทำงาน 150 ชั่วโมง จากแบรนด์ SARAMONIC
SARAMONIC SoundBird T3
Directional Condenser Microphone
The Saramonic SoundBird T3 is directional shotgun microphone features a cardioid polar pattern, built-in rechargeable battery, 150 Hz low cut switch, +6 dB high frequency boost, -10 db PAD and power button.
The Sound Bird T3 from Saramonic is a professional shotgun microphone that delivers broadcast-quality sound for ENG, filmmaking, field recording, sound design, and broadcast applications.
- -10dB Pad
Attenuates the microphone input to allow for the recording of loud sounds without clipping.
- 150 Hz High Pass Filter
Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording.
- High Frequency Boost
Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech.
- Rechargeable Built-in Li-ion Battery
The built-in battery supports at least 150 hours operation.
- Solid Brass Construction
Prevents radio frequency interference for clean sound
- Gold-Plated XLR Connector
Resists corrosion and ensures excellent signal transfer
- Battery Indicator
If you would like to check the battery level during recording, double press the Power button, the 4 indicators will show the remaining battery capacity. If 4 indicators are all blue, the battery is full.
- Supplied with foam windshield, mic clip and shock mount, XLR Cable and MicroUSB charging cable
| Directional Pattern | Cardioid |
| Frequency Range | 75 to 20k Hz (selectable HPF 150 Hz) |
| Sensitivity | -38 ± 3dB(OdB=1 V/Pa,at 1 kH 1.5V 2.2K) |
| Output Impedance | 150ohm |
| Dynamic Range | 125 dB (per IEC651) |
| Maximum SPL | f=1KHzTHD, 1% 105 dB |
| Signal to Noise Ratio | 80 dB SPL(per IEC651) |
| high pass filter button | 150 Hz |
| high frequency boost | +6 dB |
| PAD | -10 dB |
| Material | Brass |
| Output Connection | 3-pin XLR, balanced output between Pin 2 (+),
Pin 3 (-) and Pin 1 (ground) |
| Power | 48V phantom power
built-in lithium battery (battery life:150 hours) |
| Dimension | 2.2 x 2.2 x 28.2 cm |
| Weight | 240.Sg (8.48oz) |
- Sound Bird T3 microphone
- XLR output cable
- Micro USS cable for charging
- Foam windshield
- Mic Clip SR-SMC1
- Boompole/Mic Stand Shock Mount SR-SMC3
- A waterproof microphone carry case
