TASCAM DR-680 MK2 Linear PCM Field Recorder
TASCAM DR-680 MK2 เครื่องบันทึกเสียงดิจิตอล แบบพกพา DR-680 MK2 เครื่องบันทึกเสียง จากแบรนด์ TASCAM
The DR-680MKII is a portable multi-channel recorder that allows simultaneous recording up to 8 tracks at 96kHz/24-bit, coming equipped with 6 mic/line inputs and digital input channels.
Equipped with a TASCAM-developed high-sound quality HDDA (High Definition Discrete Architecture) microphone amplifier, the DR-680MKII has improved the sound quality of its op-amp and condensers through extensive listening tests.
The DR-680MKII allows high-sound quality multi-channel recording using multiple microphones at various settings such as drama and documentary productions, on-field recording, SE recording, and live concert recordings.
คุณสมบัติ
-
SD/SDHC/SDXC cards used as recording/playback media
- 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
- 6 unbalanced outputs (RCA pin jacks)
- COAXIAL digital input and output (S/PDIF, AES/EBU)
- Recording/playback formats: BWF, WAV, MP3
- With BWF format, recording starting times can be stored in files
- 8-track recording at 96kHz/24-bit (BWF, WAV)
- 6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording
- Record MP3 files at 96, 128, 192 and 320 kbps
- Record 4-channel MP3 files
- From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs
- 2-track recording at 192kHz/24-bit (BWF, WAV)
- From 2 mic/line inputs or digital stereo inputs
- Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
- Sampling frequencies
- 44.1k, 48k, 96k, 192k Hz (BWF, WAV) 44.1k, 48k Hz (MP3)
- Quantization bit depth: 16/24-bit (BWF, WAV)
- 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
- Limiter and low-cut filter available on each mic/line input
- Built-in stereo monitoring mixer for headphone mix and/or recording
- Dual-recording function allows two files to be recorded simultaneously at different levels
- GANG function allows the input gain of multiple channels to be operated simultaneously
- Pre-recording function allows the capture of audio two seconds before recording is started
- Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
- Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
- Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
-
Up to 1000 takes and 5000 files can be recorded on a single card
- Mark function can be used to move to specific points (up to 99 marks per take)
- Wheel can be used to change the playback position
- Repeat playback function
- Panel lock function to prevent misoperation
- Cascade function allows transport control of multiple DR-680MKII units using a master unit
- File name format can be set to use a user-defined word or the date
- High-speed transfer of files to a computer using USB2.0
- 128×64-dot matrix display with backlight
- Built-in mono speaker with 500mW output
- Headphone output and level control (50mW+50mW/ 32ohm)
- Powered by 8 AA batteries or the included AC adapter
- USB cable and shoulder strap included
- Folding stand convenient for tabletop use
- CS-DR680 carrying case (sold separately)
- AR-DR680 case by Portabrace also available
สเปค
| Recording media | SD card (64MB to 2GB)SDHC card (4GB to 32GB)SDXC card (64GB to 128GB) |
| File system | FAT16 / FAT32 |
Recording format |
|
| WAV | 44.1k / 48k / 96k / 192k Hz, 16 / 24-bit *192kHz: 2ch recording/playback |
| BWF | 44.1k / 48k / 96k / 192k Hz, 16 / 24-bit *192kHz: 2ch recording/playback |
| MP3 | 44.1kHz, 16-bit, 96k to 320k bps |
Analog audio inputs |
|
| MIC/LINE (BALANCED) | |
Connector |
|
| Ch 1-4 | XLR-3-31 / 1/4″ (6.3mm) TRS Phone Combo jack × 4(1: GND, 2: HOT, 3: COLD) |
| Ch 5-6 | 1/4″ (6.3mm) TRS Phone jack × 2 |
Set to MIC |
|
| Input impedance | 2.4kΩ |
| Phantom power | +48V (+5%, –10%), +10mA/Ch |
Standard input level |
|
| LOW | –51.5dBu |
| HIGH | –75.5dBu |
Maximum input level |
|
| LOW | +3dBu |
| HIGH | –21dBu |
| MIC input gain | 63dB |
Set to LINE |
|
| Input impedance | 10kΩ |
| Standard input level | +4dBu |
| Maximum input level | +24dBu |
| LINE input gain | 63dB |
Analog audio output |
|
LINE OUT (UNBALANCED) |
|
| Connector | RCA Pin jack × 6 |
| Output impedance | 200Ω |
| Standard output level | –10dBV |
| Maximum output level | +6dBV |
Phones |
|
| Connector | 1/4″ (6.3mm) Stereo Phone jack × 1 |
| Maximum output level | 50mW + 50mW (32Ω loaded) |
Speaker |
|
| Diameter | 35 mm |
| Impedance | 8Ω |
| Maximum output level | 500mW |
Digital Input/Output |
|
| Connector | RCA Pin jack × 1 |
| Format | IEC60958-3 (S/PDIF), AES3-2003 (AES/EBU) |
| Single | 44.1k / 48k Hz |
| Double | 96kHz |
| Quad | 192kHz |
| Level | 0.5 Vp-p typical |
| Output impedance | 75Ω ±20% unbalance |
SYNC Input/Output |
|
| Connector | RCA Pin jack × 1 |
USB |
|
| Connector | USB Mini-B type × 1 |
| Format | USB2.0 HIGH SPEED (480Mbps) |
| Power | 8 AA batterie s(LR6)AC100 – 240V, 50/60Hz |
| Power consumption | 8W (Phantom power on) |
| Continuous operation time | * All times are approx.mate. |
| Alkaline batteries(EVOLTA) | 6 hours (Rec: 2ch, Phantom power OFF)4.5 hours (Rec: 2ch, Phantom power ON)3.5 hours (Rec: 6ch, Phantom power ON) |
| NI-MH batteries(eneloop) | <5.5 hours (Rec: 2ch, Phantom power OFF)4.5 hours (Rec: 2ch, Phantom power ON)4 hours (Rec: 6ch, Phantom power ON) |
| Lithium batteries(Energizer ULTIMATE LITHIUM) | 11 hours (Rec: 2ch, Phantom power OFF)9.5 hours (Rec: 2ch, Phantom power ON)7.5 hours (Rec: 6ch, Phantom power ON) |
| Dimensions | 8.5″ × 2.2″ × 7.4″ / 216.4 × 56 × 188.4 mm |
| Weight | 3.1 lbs. / 1.4 kg (including batteries), 2.6 lbs. / 1.2 kg (excluding batteries) |
| Operating temperature | 32˚F to 104˚F / 0˚C to 40˚C |
| Standard accessories | AC adaptor, USB cable, Shoulder strap, Owner’s manual including warranty card |
Audio performance
| Frequency response | 20Hz to 20kHz +0.5/–1.5dB (Fs 44.1kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 20kHz &plulsmn;0.5dB (Fs 48kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 40kHz +0.5/–1.0dB (Fs 96kHz, LINE IN to LINE OUT, Input Level=FS–1dB) 20Hz to 80kHz ±5.0dB (Fs 192kHz, LINE IN to LINE OUT, Input Level=FS–1dB) |
| Distortion | 0.007% (1kHz, LINE IN to LINE OUT) |
| S/N ratio | 100dB (A-Weight, MIC IN to DIGITAL OUT) 100dB (A-weight, LINE IN to LINE OUT) |
| EIN | –124dBu or less |
Computer compatibility
| Windows | Windows XP, Windows Vista, Windows 7, Windows 8 |
| Macintosh | Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8) |
