FOCUSRITE ISA 828 Eight Channel Mic Pre And Optional A-D
FOCUSRITE ISA 828 เครื่องเปลี่ยนแปลงสัญญาณไมค์ 8 ชาแนล ISA 828 ปรีแอมป์ ไมค์ จากแบรนด์ FOCUSRITE
ISA 828 incorporates eight of Focusrite’s renowned mic pres in a simple-to-operate 2U enclosure, placing eight mic preamps, instrument inputs and line ins at your fingertips. The original Focusrite mic pre was designed to suit the microphones of the time; today’s model makes one small change, adding three additional input impedances to the classic ISA 110 setting, allowing you to match any microphone, old or new, and access a wide range of sounds, from the character and warmth of a vintage mic to the clear transparency of a modern design.
Each mic pre has the option of mic, line or the front-panel instrument input, with variable input impedance to ensure you are getting the best performance from the source. Up to 60dB of gain is available on the four-position rotary and gain range switches, with a further +20dB of continuously variable trim, meaning a huge 80dB of gain is available should it be required. The high-pass filter features variable cut-off frequency between 16 and 420Hz. An array of 6-segment LED meters show peak signal level for the four mic pres, in addition to the four direct inputs to the optional A-D card. Switchable rear-panel insert points allow the use of inline processors such as compression.
- Classic ISA mic preamp design featuring Lundahl LL1538 input transformer
- Front-panel instrument inputs to first four channels
- Line inputs with dedicated input connectors and front-panel switch
- Switchable input impedance including classic ISA 110 setting
- High-pass filters
- Switchable insert points when used with A-D card
- Per-channel six-segment LED peak-level meters
- Optional A-D card with up to 192kHz, 24-bit sampling via ADAT or AES3
MIC INPUTS |
|
Gain Range (Mic) |
0 dB to 60 dB in 10 dB steps |
Input Impedance (Mic) |
Variable, 600O, 1k4O, 2k4O, 6k8O |
Noise At Main Output With Gain At Unity (0 DB) (Mic) |
-97 dBu measured with a 22 Hz / 22 kHz bandpass filter |
Signal To Noise Ratio Relative To Max Headroom (9dBu) (Mic) |
106 dB |
THD At Medium Gain (30dB) (Mic) |
0.0008 measured with a 1 kHz -20 dBu input signal and with a 22 Hz / 22 kHz bandpass filter |
Frequency Response At Minimum Gain (0 DB) (Mic) |
-0.5 dB down at 10 Hz and –3 dB down at 110kHz |
Frequency Response At Maximum Gain (60 DB) (Mic) |
–3 dB down at 16 Hz and –3 dB down 85 kHz |
CMRR (Mic) |
91.8 dB (Channel 1, 1 kHz, maxiumum gain) |
LINE INPUTS |
|
Input Impedance (Line) |
10 kO from 10 Hz to 200 kHz |
Gain Range (Line) |
-20 dB to 10 dB in 10 dB steps |
Noise At Main Output With Gain At Unity (0 DB) (Line) |
-96 dBu measured with a 22 Hz / 22 kHz bandpass filter |
Signal To Noise Ratio Relative To Max (Line) |
120 dB |
Signal To Noise Ratio Relative To 0dBFS( 22dBu) (Line) |
118dB |
THD At Unity Gain (0dB) (Line) |
0.001 measured with a 0 dBu input signal and with a 22 Hz / 22 kHz bandpass filter |
Frequency Response At Unity Gain (0dB) (Line) |
0.3 dB down at 10 Hz and –3 dB down at 122 kHz |
INSTRUMENT INPUTS |
|
Gain Range (Instrument) |
10 dB to 40 dB continuously variable |
Input Impedance (Instrument) |
1 MO or 300 kO |
Noise At Minimum Gain ( 10 DB) (Instrument) |
-90 dBu measured with a 22 Hz / 22 kHz bandpass filter |
Noise At Maximum Gain ( 40 DB) (Instrument) |
-62 dBu measured with a 22 Hz / 22 kHz bandpass filter |
THD At Minimum Gain ( 10 DB) (Instrument) |
0.002 measured with a 10 dBu input signal and with a 22 Hz / 22 kHz bandpass filter |
Frequency Response At 10 DB Gain With -10 DB Input (Instrument) |
10 Hz – 200 kHz /- 0.6 dB |
Frequency Response At 40 DB Gain With -40 DB Input (Instrument) |
-2.5 dB down at 10 Hz and 0 dB at 200 kHz |
Roll Off |
18 dB per octave 3 pole filter |
Frequency (Instrument) |
Fixed 75Hz measured at the 3dB down point |
WEIGHT AND DIMENSIONS |
|
Weight |
8.84 kg (19.5 lbs) |
Dimensions (W X H X D) |
484mm (W) x 85mm (H) x 305mm (D) (350mm depth with heat sink) |