FOCUSRITE REDNET HD32R 32×32 Pro Tools | HD I/O With Dual PSUs
FOCUSRITE REDNET HD32R เครื่องแปลงสัญญาณจากอนาล็อกเป็นดิจิตอล 32-IN/32-OUT 24-BIT/192kHz REDNET HD32R ออดิโออินเตอร์เฟส จากแบรนด์ FOCUSRITE
RedNet HD32R is a 1U, Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing up to 32×32 channels of I/O (16×16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it’s Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.
- 32×32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16×16 at 192kHz)
- Up to 24-bit, 192kHz sampling rates
- Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
- Comprehensive remote control and remote signal metering through RedNet Control
- Primary and Expansion DigiLink mini connections
- AES67 compliant
- Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
DIGITAL PERFORMANCE |
|
Supported Sample Rates | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit |
Clock Sources | Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master |
External Word Clock Range | Nominal sample rate ±7.5 |
Channel Count | 32×32 at up to 96kHz sampling rate, 16×16 at 176.4 and 192kHz |
REAR PANEL CONNECTIVITY |
|
Primary Port | 1 x Mini DigiLink |
Expansion Port | 1 x Mini DigiLink |
Word Clock Input | 1 x BNC 75O port (switchable termination) |
Word Clock Output | 1 x BNC 75O port |
PSU | 2 x IEC Inputs with retaining clips |
Network | 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors |
FRONT PANEL INDICATORS |
|
Primary PSU (A) | Green LED. Illuminates when an AC input is applied and all DC outputs are present |
Primary PSU (B) | Green LED. Illuminates when an AC input is applied and all DC outputs are present |
Primary Network | Green LED. Indicates that a network connection is present on primary port when in redundant mode |
Secondary Network | Green LED. Indicates that a network connection is present on secondary port when in redundant mode |
Network Locked | Green LED. When unit is network slave, shows valid network lock. When unit is network master |
Sample Rate | Orange LED for each: 44.1 kHz, 48 kHz, x2, x4 |
Pull Up/Down | Orange LED. Indicates unit is set to operate on a Dante pull up/down domain |
Signal Indicators | 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS |
Clock Source | Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master |
NETWORK MODES |
|
Redundant | Allows unit to connect two independent networks |
Switched | Connects both ports to integrated network switch allowing daisy-chaining of device |
DIMENSIONS |
|
Height | 44.5mm/ 1.75″ |
Width | 482.6mm/ 19″ |
Depth | 263mm/ 10.35″ |
WEIGHT |
|
Weight | 3.9kg |
POWER |
|
Power PSU | 2 x Internal, 100-240V, 50/60Hz, consumption 30VA |
HEAT PERFORMANCE |
|
Operating Temperature | Operates at up to an ambient temperature of 50 degrees Celcius |