ITC T-62000 มิกเซอร์แอมป์ แบบ 70V/100V 2000 วัตต์ MONO จากแบรนด์ ITC
ITC T-62000
High Power Pure Post Broadcast Amplifier
Broadcast power amplifier is a high performance switching power supply, single channel, high power, pure post level broadcast amplifier. Its structure is compact and reasonable. Smart protection circuitry provides advanced technology to protect internal circuitry and connected loads,and amplifiers and speakers can be protected under extreme conditions. It provides regional power amplification for broadcast system, suitable for large area of broadcast sound reinforcement, including large and medium schools, buildings, clubs, bars, parks and so on.
คุณสมบัติ
-
Using 1U to simplify the structure. The new topology third generation real time power supply tracking power amplifier technology,Design of high efficiency power amplifier circuit,to offer high efficiency,With Very small size, light weight and long service life of the system, high fidelity sound quality, and perfect restore sound source quality.
-
with switch automatic soft start.
-
Zero crossover distortion.
-
ZVS, ZCS soft switching power supply function, to achieve 92% of the high system efficiency
-
High frequency transformer as system isolation.
-
Built in intelligent top distortion and over current limit system.
-
Two constant pressure output mode: 70v/100v.
-
Built in automatic temperature control fan cooling system
-
With over temperature, over voltage, under voltage, over current, short circuit multiple intelligent detection protection system
-
1 channel unbalanced trs/xlr line input, 1 channel balanced XLR cascade line output;
-
The panel with volume adjustment knob
สเปค
Model |
T-62000 |
Rated Power Output |
2000W |
Speaker Outputs |
70V, 100V |
Input Sensitivity & Source Impedance |
775mV/10KΩ, Balanced xlr/trs interface |
output Sensitivity & Source Impedance |
775mV/470Ω, Balanced XLR interface |
Frequency Response |
80Hz~16KHz(+1dB, -3dB ) |
Noise-signal Ratio |
>90dB |
Total Harmonic Distortion |
1kHz 0.5%, 1/3 output power |
Ground Line Suspension Switch |
Signal ground line optional chassis or suspension |
Heat Radiation |
Forced air cooling from front to back, start the built-in fan when radiator temperature is up to 45 degrees |
Protection |
Over heat, over load & short circuit |
Power Supply |
~220-240V 50/60Hz |
Power consumption |
2500W |
Dimension |
484x260x44mm |
Weight |
5.3Kg |
Material Quality |
Black aluminum panel, SPCC cold rolled plate material case |