เครื่องผสมสัญญาณเสียง ITC TI-120S พร้อมปุ่มปรับระดับเสียงแยกอิสระ ขนาด 120 วัตต์ Mixer Amplifier จากแบรนด์ ITC
ITC TI-120S
5 Zones Integrated Amplifier
The TI-S series 5 zone mixer amplifiers are 3U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal combined mic inputs of 1/4″ phone jack and XLR type. 2 line inputs by dual RCA type are also provided.
The uniqueness of this amplifier is that the 5 zone outputs with separate volume control, which provide flexible zone control. Each 6 inputs are equipped with bass/treble tone controls.
A remote 5 zone paging console T-318 is provided for announcement and control from another location.
Master, Mic1-4, line1-2 volume control & 6 separate treble/bass tone control for each input are provided, along with mic 1 of priority over other inputs. Each channel input with separate treble and bass control.
Built-in sire for fire alarm system, EMC input, built-in chime, 2/4 tone chime selector, chime remote trigger. The TEL input could be used as telephone paging system over PA system.
The REC output for tape recorder and PRE output, AMP input for adding extra signal processor like mixer, graphic equalizer.
Complete protection includes short circuit and thermal protection, current limiter and overloading.
คุณสมบัติ
ITC TI-120S
- 7 inputs 5 zone mixer amplifier
- Rack mount amplifier in 3U type
- Rated power output 120W, 240W, 350W and 500W
- 70V, 100V and 4-16ohm speaker terminals
- 5 zone 100V outputs and all zones outputs
- 4 balanced combined mic inputs of 1/4”phone jack and XLR type with separate gain control and phantom power switch
- 2 dual RCA line inputs, TEL and EMC input
- Each zone speaker output with separate volume control
- Remote paging console T-318 for zone paging control
- Built-in siren and 2/4 tone chime
- Volume control over master, Mic1-4, Line1-2, chime, siren, all zone output and each 5 zone output, tel input and remotepaging mic
- 5 levels of input priority from high to low: EMC input, tel input, remote paging console, Mic1, siren/chime over other inputs
- REC output for tape recorder
- PRE Output and AMP input for extra signal processor
- AC 110V or 220V and DC 24V operation
สเปค
Model
- TI-120S
Amplifier Section(4ΩLoad Output)
- Rated Output Power (THD 1%) 120W(RMS)
- Speaker Zone 1~5 Output 25W MAX
Mic Input Section(Mic 1~4 In@1KHz)
- Input Sensitivity/Impedance
- 5mV 600Ω-245mV 5KΩBAL
- S/N Ratio
- Better than 55dB
- Frequency Response (±3dB)
- 50Hz~20,000 Hz
- Tone Control (Bass:100Hz, Treble:10KHz)
- ±10dB
- Phantom Power
- + 48V
Line Input Section(Mic 1~2 In@1KHz)
- Input Sensitivity/Impedance
- 350mV/47KΩ
- S/N
- Better than 65dB
- Frequency Response (±3dB)
- 50Hz~20,000 Hz
-
Tone Control (Bass: 100Hz,Treble:10KHz)
-
±10dB
-
Tel Audio Input
- Input Sensitivity/Impedance
- 0.775V/10KΩ
- S/N
- Better than 65dB
- Frequency Response (±3dB)
- 50Hz~20,000 Hz
EMC Audio Input
- Input Sensitivity/Impedance
- 0.775V/10KΩ
- S/N
- Better than 65dB
- Frequency Response (±3dB)
- 50Hz~20,000 Hz
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)
- 1V/600Ω
Remote MIC Sensitivity/Impedance
- 775mV/10KΩ
THD
- Less than 0.1% at 1KHz, 1/3 rated power
Power Supply
- ~110V/60Hz or ~230V/50Hz & DC 24V
Power Consumption
- 180W
Dimensions
- 484x399x132 mm
