JBL Control 88M ลำโพงสนามหญ้า 2 ทาง ขนาด 8 นิ้ว 240 วัตต์

฿17,900 (รวม VAT 7% แล้ว)

ราคาต่อใบ

เช็ค Stock และราคาสินค้า กับเจ้าหน้าที่ก่อนสั่งซื้อทุกครั้ง
รับสินค้าภายใน 3 - 7 วัน (ขึ้นอยู่กับที่อยู่จัดส่งของลูกค้า)

สงวนสิทธิ์การเปลี่ยนแปลงข้อมูล ราคา ไม่แจ้งให้ทราบล่วงหน้า
สงวนสิทธิ์การรับผิดชอบเนื่องจากการพิมพ์ผิดพลาดต่างๆ

JBL Control 88M ลำโพงสนามหญ้า 2 ทาง ขนาด 8 นิ้ว 240 วัตต์ Control 88M Mushroom Landscape Speaker จากแบรนด์ JBL

JBL Control 88M

Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

คุณสมบัติ

Components:
• 8” highly weather-resistant driver
• 1” soft-dome highly weather-resistant tweeter
120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
Tough polyethylene highly weather resistant enclosure
Fully isolated center chamber for wiring protection
High fidelity sound character with broad frequency range of 47Hz – 16kHz

น้ำหนัก	10.5 กก.
ขนาด	355 × 355 × 524 มิลลิเมตร
ยี่ห้อ	JBL

ดาวน์โหลด

สเปค

	Frequency Response (-10dB)	47 Hz – 16 kHz
	Power Rating	240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)
	Transformer Taps	70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
	Frequency Response (±3 dB)	60Hz – 15 kHz
	Maximum Input Voltage	28.0 V
	Sensitivity	87 dB, 1W @ 1m (ave. 80Hz – 16kHz)
	Nominal Coverage Angle	360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
	Directivity (Q)	2.1
	Directivity Index (DI)	3.2 dB
	Rated Maximum SPL	108 dB @ 1m
	Nominal Impedance	8Ω (at 8Ω setting)
	Minimum Impedance	6.6Ω at 9.5kHz
	Insertion Loss	<0.5 dB at any tap setting
	Thru Setting	8Ω nominal
	Crossover Type	2nd Order LPF on LF and 2nd Order HPF on HF
	Recommended Protective High-Pass	45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
	Low Frequency Driver	200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
	High Frequency	25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
	Enclosure Material	LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
	Grille	Powder coated stainless steel.
	Environmental	IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
	Agency Ratings	UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
	Terminals	Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
	Wiring	Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
	Colors	Hunter Green, RAL6018
	Dimensions (H x W x D)	524 x 355 x 355 mm (20.7 x 14 x 14 in.)
	Net Weight	7.8 kg (17 lb)
	Shipping Weight	10.5 kg (23 lb)
	Included Accessories	(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
	Installer-Supplied Required Tools	22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.