Audio Interface TASCAM US-1x2HR 1mic, 2-in/2-out ละเอียดสูงสุด 24bit/192kHz และเชื่อมต่อแบบ USB-C พร้อม Plugin และโปรแกรมที่แถมมาให้ จากแบรนด์ TASCAM
TASCAM US-1x2HR
For guitar/vocal recording musicians
1 XLR mic input and 1 TRS line/guitar input audio interface with 192 kHz support and USB-C bus power connection. The included loopback function and OBS support makes this interface an excellent choice for podcasts and live streaming. The new US-1x2HR offers simple and intuitive operation, sophisticated looks, a rich assortment of software bundles, and improved audio performance, thanks to the newly enhanced audio circuit.
Features at a glance
- 2-in/2-out USB audio interface
- Supports up to 24-bit/192 kHz audio formats
- Improved TASCAM driver with selectable buffer size from 4 samples provides low-latency and stability (Windows: TASCAM native driver)
- 1 XLR input equipped with Ultra-HDDA mic preamp and +48V phantom power
- 1 TRS line/inst. input
- RCA line L/R inputs
- RCA line L/R outputs
- 1 headphone output
- USB Type-C connection (USB Type-A to Type-C cable included)
- Powered by USB bus power
- Zero-latency direct monitoring
- Compatible with iPad and other iOS devices
- Extensive line-up of bundled software
- Steinberg Cubase LE, Cubasis LE 3
- IK Multimedia Sample Tank 4 SE
- Antares AUTO-TUNE UNLIMITED (available free of charge up to 3 months)
- Stereo/mono selectable loopback function (Windows, Mac, iOS, iPad OS)
- OBS support
Spec description
Sampling frequency | 44.1k/48k/88.2k/96k/176.4k/192k Hz |
Quantization bit rate | 24bit |
Analog audio inputs | |
MIC IN (IN 1) | |
Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
Input impedance | 2.4k ohms |
Maximum input level (GAIN:MIN) |
+9dBu (2.183Vrms) |
Gain | 58dB |
LINE/INST IN(IN 2) | |
LINE IN | |
Connector | 6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED * When set to “LINE” at LINE/INST switch |
Input impedance | 10k ohms |
Maximum input level (GAIN:MIN) |
+20dBu(7.75Vrms) |
Gain | 45dB |
INST IN | |
Connector | 6.3mm(1/4″) TS-jack(T:HOT, S:GND), UNBALANCED * When set to “INST” at LINE/INST switch |
Input impedance | 1M ohms or more |
Maximum input level (GAIN:MIN) |
+3dBV(1.1425Vrms) |
Gain | 45dB |
LINE L/R IN | |
Connector | RCA pin-jack, UNBALANCED |
Input impedance | 10k ohms |
Maximum input level | +6dBV(1.9953Vrms) |
Analog audio outputs | |
LINE OUT | |
Connector | RCA pin-jack, UNBALANCED |
Output impedance | 100 ohms |
Maximum output level | +6dBV (1.995Vrms) |
PHONES | |
Connector | 6.3mm(1/4″) stereo phone jack |
Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) |
Control IN / OUT | |
USB | |
Connector | USB Type-C |
Format | USB2.0 HIGH SPEED (480Mbps) |
DC IN 5V | |
Connector | USB Micro B type |
Power | |
When connected PC | USB bus powered |
When connected iOS | USB power adapter (that can supply 5V and a current of at least 700mA)*1 External battery pack (that can supply 5V and a current of at least 700 mA)*2*1 We strongly recommend using TASCAM PS-P520E AC adapter or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod touch. To use it with an iPod touch, purchase a genuine Apple USB power adapter (that can supply 5V and a current of at least 700mA) separately. *2 We strongly recommend using a TASCAM BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5V and a current of at least 700mA. |
Power consumption | 1.8W |
Dimensions | 146(W) × 55(H) × 120(D)mm (including protrusions) |
Weight | 623g |
Operating temperature | 5 to 35°C |
Accessories | USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner’s Manual (including warranty) |
Audio performance
Mic amp EIN (equivalent input noise) | -128dBu or less (150ohm termination with gain knob at MAX) |
Frequency response | |
MIC IN 1 | |
44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.4dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.4dB(JEITA) |
LINE IN 2 | |
44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.3dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.3dB(JEITA) |
LINE OUT | |
44.1k/48k Hz | 20Hz to 20kHz, +0.2dB/-0.4dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0.2dB/-0.4dB(JEITA) |
THD + N | 0.0013% (MIC IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) |
0.0027% (LINE IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) | |
0.0015% (LINE OUT, 1kHz sine wave, -4dBFS input, MONITOR knob at maximum, 20kHz SPCL LPF) | |
S/N ratio | 109dB (MIC IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) |
105dB (LINE IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) | |
110dB (LINE OUT, MONITOR knob at maximum, 20kHz SPCL LPF+A-Weight) | |
Crosstalk | 95dB or more (MIC/LINE IN to LINE OUT, 1kHz sine wave, GAIN knob at minimum) |
Computer system requirements
Windows
Compatible computers | Windows computer with a USB 2.0 (or higher) port |
CPU type/speed | 2GHz or faster dual core processor (x86) |
Memory | 2GB or more |
Driver | ASIO2.0, WDM |
Mac
Compatible computers | Mac with a USB 2.0 (or higher) port |
CPU type/speed | 2GHz or faster dual core processor |
Memory | 2GB or more |
Driver | Core Audio |
iOS/iPadOS divice
Driver | Core Audio |
* To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary.