RODE Broadcaster ไมค์บันทึกเสียง RODE Broadcaster ไมโครโพนสำหรับห้องบันทึกเสียง RODE Broadcaster ไมค์ห้องอัด จากแบรนด์ชั้นนำ RODE
RODE Broadcaster
End-Address Broadcast Condenser Microphone (Microphone for Video/Broadcast ไมโครโฟนสำหรับผลิตรายการ)
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster’s native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative ‘On-Air’ indicator on the body that can be wired for external activation by the ‘Channel On/Mute’ function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
-
HF2 1” capsule with gold plated diaphragm
-
On-Air indicator LED
-
Ultra-low noise
-
Voice tailored low-cut feature
-
Internal pop-filter
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter with bipolar output buffer |
Capsule |
1.00″ |
Polar Pattern |
Cardioid-Picks up audio from the front and sides and rejects from the rear |
Address Type |
End |
Frequency Range |
20Hz – 20kHz |
Output Impedance |
40Ω |
Maximum SPL |
128dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level |
2.0mV |
Sensitivity |
-34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
14dB-A |
Power Options |
+24V +48V phantom power required from mixer or interface |
Weight |
577.00gm |
Dimensions |
167.00mmH x 50.00mmW x 65.00mmD |
Output |
3-pin XLR Output |
-
Broadcaster : End-Address Broadcast Condenser Microphone 1 ตัว
-
RM2 : Ring-Mount Microphone Stand 1 ชุด
-
ZP1 : Padded Zip Pouch 1 ชุด