RODE NT2-A ไมค์บันทึกเสียง RODE NT2-A ไมโครโพนสำหรับห้องบันทึกเสียง RODE NT2-A ไมค์ห้องอัด จากแบรนด์ชั้นนำ RODE
RODE NT2-A
Multi-Pattern Dual 1″ Condenser Microphone (Studio Microphones)
The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1″ capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
The frequency and transient response of this transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.
-
Large 1” HF1 gold sputtered capsule
-
On body control of polar pattern, HPF and PAD
-
Three position variable polar pattern – Omni, Cardioid or Figure 8
-
Three position variable High-Pass Filter – Flat, 40Hz or 80Hz
-
Three position PAD – 0dB, -5dB or -10dB
-
Ultra low noise
-
Internal capsule shock mounting
-
Includes RØDE SM6 shock mount, pop filter and dust cover
-
Designed and manufactured in Australia
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter with bipolar output buffer |
Capsule |
1.00″ |
Polar Pattern |
|
Address Type |
Side |
Frequency Range |
20Hz – 20kHz |
Output Impedance |
200Ω |
Maximum SPL |
147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level |
16.0mV |
Sensitivity |
-36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) |
7dB-A |
Power Options |
|
Weight |
860.00gm |
Dimensions |
209.00mmH x 55.00mmW x 55.00mmD |
Output |
|
Cardioid-Picks up audio from the front and sides and rejects from the rear
Figure 8-Picks up from the front and rear and rejects sides
Omnidirectional-Picks up all sides equally
+24V 
+48V phantom power required from mixer or interface
3-pin XLR Output
NT2-A Multi-Pattern Dual 1″ Condenser Microphone
SM6 Shock Mount with Detachable Pop Filter
XLR cable (6m) shielded XLR cable (6m/20′)
Microphone Dust Cover Premium drawstring dust cover
