ชุดไมค์บันทึกเสียง SE ELECTRONICS X1 S Studio Bundle พร้อม RF-X Reflexion Filter®, Isolation Pack และ mic cable 3 เมตร ของแท้ ส่งฟรี จากแบรนด์ SE ELECTRONICS
SE ELECTRONICS X1 S Studio Bundle
SE ELECTRONICS Isolation Pack
Pop Filter อุปกรณ์เสรืม สำหรับนักร้อง 1 ชุด
SE ELECTRONICS X1 S ไมค์จ่อเครื่องดนตรี ไมโครโพนสำหรับห้องบันทึกเสียง X1 S ไมค์ห้องอัด จากแบรนด์ชั้นนำ SE ELECTRONICS
SE ELECTRONICS X1 S the new gold standard in affordable condensers.
The X1 S is a refined version of sE’s best-selling X1, tuned for advanced performance in every way imaginable.
When sE introduced the X1 in 2010, it redefined the potential of an affordable hand-crafted condenser microphone.
With the highest dynamic range and SPL handling capabilities in its class, along with expanded features that dramatically increase its flexibility, the X1 S has been improved in every way – yet is even more affordable than the original.
CUSTOM-DESIGNED, HAND-CRAFTED CAPSULE
Just like its predecessor, the X1 S utilizes a hand-made condenser capsule, meticulously constructed and tuned in sE’s capsule room by technicians with decades of experience.
This results in a capsule built like the world’s finest musical instruments – and a capsule truly up to the challenge of recording them.
Where the original X1 was powerful, the redesigned electronics of the X1 S take its performance to a whole new level, giving it the highest dynamic range in its class.
Its internal redesign also allows for improved sensitivity, dramatically increased SPL handling (up to 160dB!), and a huge reduction in self-noise.
TWO SWITCHABLE ATTENUATION LEVELS
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments…think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
TWO SWITCHABLE LOW-CUT FILTERS
Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.
- Capsule Type: Hand-Crafted 1″ True Condenser
- Polar Pattern: Cardioid
- Frequency range: 20 Hz – 20 kHz
- Sensitivity: 30 mV/Pa (-30.5 dBV)
- Max SPL: 140 / 150 / 160 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
- Equivalent noise level: 9 dB(A)
- Dynamic range: 131 / 141 / 151 dB (0/10/20 dB Attentuation pad)
- Signal to Noise Ratio: 85 dB
- Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
- Attenuation Pad: 10 / 20dB, switchable
- Powering: 48 Volts according to IEC 61938
- Electrical Impedance: 125 Ohms
- Recommended load impedance: >1k Ohms
- Current consumption: 6 mA
- Connectivity: 3-pin male XLR connector
- Dimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)
- Weight: 445 g (15.70 oz.)
Reflexion Filter SE ELECTRONICS RF-X อุปกรณ์ลดเสียงรบกวนในห้อง สำหรับนักร้อง วัสดุใหม่ได้รับการพัฒนาเพื่อให้ RF-X เบากว่ารุ่นก่อน แต่ยังคงความทนทานไว้ จากแบรนด์ SE ELECTRONICS
SE ELECTRONICS RF-X REFLEXION FILTER®
The RF-X is an instant vocal booth for any home studio.
Unwanted room sound interfering with your recordings? With the RF-X, anyone can capture a great-sounding recording anywhere.
Using the same design technology as the industry standard Reflexion Filter® PRO, the RF-X was conceived to answer the needs of the discerning recording artist working on a budget. With its lightweight vented body and an efficient, redesigned clamp assembly, the RF-X is simplicity itself, providing stellar performance and ease-of-use.
New materials have been developed to make the RF-X lighter than its predecessors but also to maintain its durability – helping to position the RF-X as a versatile product suited for any challenging working environment. It features a four-layer acoustic filter design comprised of the outer vented composite panel, a wool fabric layer, an air gap layer and an inner acoustic foam layer.
This multi-layer design differentiates the RF-X from its competitors by filtering frequencies evenly across the whole spectrum, helping to ensuring that recordings exhibit almost zero sound coloration when using the filter.
And just like the RF Pro and RF SPACE, each RF-X is
assembled by hand in the sE factory.
Clean up your recordings. Get an RF-X.
- Reflexion Filter® X
- Mounting bracket
- Mic stand thread adapter
The Isolation Pack is a great add-on for anyone looking to increase the versatility of their X1 Series or sE2200 Series mic.
The integrated quick-release mechanism at the base of the shock mount makes it easy to insert or remove a mic. No screws, no hassle, just one twist to secure or release.
Made from metal (rather than delicate fabric), the pop filter can be vertically positioned to accommodate any of the above mics, or completely removed from the shock mount if desired.