TASCAM TM-280 ไมค์สำหรับจ่อเครื่องดนตรี เช่น กลอง กีตาร์ ใช้บันทึกเสียงได้ทั้งในสตูริโอ และนอกสถานที่ สามารถใช้บันทึกเสียงสิ่งแวดล้อม หรือเสียงธรรมชาติ TASCAM TM-280 ไมค์บันทึกเสียงแบบ คอนเดนเซอร์ จากแบรนด์ TASCAM
TASCAM TM-280
Studio Condenser Microphone
Large Diaphragm – Ideal for vocal applications, the large, gold-plated 34mm diaphragm provides high sensitivity, low noise, and pristine clarity
Cardioid (unidirectional) Polar Pattern – Provides precise directional focus and increases the rejection of signal bleed
80dB SN Ratio – This top-performing spec is achieved by using high-end components and ensures ultra low-noise operation
-10dB Switch – When engaged, the -10db cut is used to help prevent clipping when recording high level sources
Shockmount and Pop Filter – These included essential tools are used to eliminate plosives and reduce unwanted traffic noise
Condenser vs. Dynamic microphones
TM-280 is a condenser-type microphone, which is quite different from a dynamic microphone which is typically used in live performances. The diaphragm essentially works with pneumatic vibrations. Inside of a dynamic microphone, the voice coil operates with the diaphragm, which increases the weight of the entire part. On the other hand, a condenser microphone incorporates a diaphragm in the either side of the electrode in an electrical part referred to as condenser, achieving a lightweight structure. This allows excellent follow-up performance, greatly contributing to high-precision sound. Thus, the mechanism to convert sound into electrical signals is different between the two: Dynamic microphones are powered by electromagnetic induction whereas condenser microphones take out static signals. To give condenser microphones the potential difference, power supply is required.
Mircrophone type |
Condenser |
Diaphragm |
34mm Pure Gold-sputtered |
Polar Pattern |
Cardioid (Unidirectional) |
Frequency response |
20Hz to 20,000Hz |
Output impedance |
50Ω ±30% |
Load impedance |
> 1kΩ |
Sensitivity |
–36dB ±2dB (0dB=1V/Pa at 1kHz) |
Max. SPL |
135dB |
S/N ratio |
80dB |
Connector |
3 pin XLR, Male × 1 |
Phantom power requirements |
48V |
Dimensions |
1.98″ × 7.4″ |
Weight |
14.7 oz. |
Included accessories |
Suspension shockmount (5/8″ fitting), Pop filter, Flight case, 5/8″ to 3/8″ conversion adapter |
