SHURE MXCWAPT แอกเซส พอยต์ ทรานล์ซีฟเวอร์ SHURE MXCWAPT Access Point Receiver จากแบรนด์ SHURE
SHURE MXCWAPT Access Point Receiver
The SHURE MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in the 2.4 GHz and 5 GHz frequency bands and switches channels to avoid potential interference. The access point provides both DanteTM and analog audio inputs and outputs, and uses a single Ethernet connection for power, audio, and control.
- แหล่งจ่ายไฟ PoE
- 10 DANTE channels in/out
- Analog XLR in/out
- ใช้ไมค์ได้ถึง 125 ตัว (เข้ารหัส)/250 (ไม่เข้ารหัส)
- ไมค์ชุดประชุมไร้สายทั้งหมดใช้ช่องสัญญาณ Wireless เพียงช่องเดียว
- ระยะครอบคลุมของสัญญาณอยุ่ที่ 50 เมตร เลือกได้ 5 ระดับ
- Controls up to 125 MXCW640 wireless conference units
- Bi-directional wireless connection provides audio to and from conference units and enables real-time control of all settings
- Operates in 2.4 GHz / 5 GHz frequency bands, including DFS spectrum
- Automatic frequency coordination, interference detection and avoidance
- Dante digital audio (10 inputs/10 outputs)
- Analog audio input and output (XLR)
- One Ethernet cable for audio, control, and PoE power
- AES-128 encryption for enhanced privacy
- Display for basic system configuration without a laptop
- LEDs indicate power, wireless connection, and network status
- Includes wall / ceiling mounting plate
AUDIO INPUTS
-
Analog Input
-
Maximum Input Level 24.9dBV 1% THD+N. Measured at Dante Output. Line Level, Analog Input Gain =
0dB, Dante Output Gain = 0dB
10.3dBV 1% THD+N. Measured at Dante Output. Aux Level, Analog Input Gain =
0dB, Dante Output Gain = 0dB
-
Frequency Response 22Hz – 20kHz (+0.5dB/-3dB) Measured at Dante Output. -6dBFS input, Line Level, Analog Input Gain
= 0dB, Dante Output Gain = 0dB
22Hz – 20kHz (+0.5dB/-3dB) Measured at Dante Output. -6dBFS input, Aux Level, Analog Input Gain
= 0dB, Dante Output Gain = 0dB
-
Total Harmonic Distortion + Noise 0.03%, typical Measured at Dante Output. -6dBFS input, 1kHz, Line Level, Analog
Input Gain = 0dB, Dante Output Gain = 0dB, 22Hz – 22kHz BW
0.02%, typical Measured at Dante Output. -6dBFS input, 1kHz, Aux Level, Analog
Input Gain = 0dB, Dante Output Gain = 0dB, 22Hz – 22kHz BW
-
Dynamic Range 115dB (A-weighted), 113dB (unweighted), typical Measured at Dante Output. Line Level, Analog Input Gain = 0dB, Dante
Output Gain = 0dB, 22Hz – 22kHz BW
112dB (A-weighted), 110dB (unweighted), typical Measured at Dante Output. Aux Level, Analog Input Gain = 0dB, Dante
Output Gain = 0dB, 22Hz – 22kHz BW
-
Preamplifer Equivalent Input Noise -92dBV (A-weighted), typical Line Level, Analog Input Gain = 0dB, 22Hz – 22kHz BW
-104dBV (A-weighted), typical Aux Level, Analog Input Gain = 0dB, 22Hz – 22kHz BW
AUDIO OUPUTS
-
Analog Output
-
Maximum Output Level 4.3dBV 1% THD+N. Audio Injected at Dante Input. Dante Input Gain = 0dB,
Analog Output Gain = 0dB
Frequency Response 1Hz – 20kHz (+0.5dB/-3dB) Audio Injected at Dante Input. -6dBFS input, Dante Input Gain = 0dB,
Analog Output Gain = 0dB
-
Total Harmonic Distortion + Noise 0.01%, typical Audio Injected at Dante Input. -6dBFS input, 1kHz, Dante Input Gain
= 0dB, Analog Output Gain = 0dB, 22Hz – 22kHz BW
-
Dynamic Range 100dB (A-weighted), 97dB (unweighted), typical Audio Injected at Dante Input. Dante Input Gain = 0dB, Analog Output
Gain = 0dB, 22Hz – 22kHz BW
-
Load Impedance >600Ω, typical
-
Type Three-pin Male XLR
-
Pinout Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)
-
XLR GND Lift Switch Position “Left (Pin 1-GND connected)
Right (Pin1-GND disconnected)”
-104dBV (A-weighted), typical Aux Level, Analog Input Gain = 0dB, 22Hz – 22kHz BW
-
Input Impedance 10kΩ Line Level
12kΩ Aux Level
-
Confguration Balanced
RF
-
WLAN Standard IEEE 802.11a,g
-
RF Frequency Bands 2.4GHz ISM / 5GHz UNII
-
Sensitivity -80dBm at 10%PER
-
Output Power 1mW (Low), 5mW (Medium), 13mW (High),
25mW (Maximum)
-
Antenna Type Proprietary Internal Bi-level Dual-Band PIFA
POWER
-
Supply Type Power Over Ethernet, 802.3af, Class 0 PD
-
Supply Voltage (at MXCWAPT)
-
Power Consumption 12.95W (max), 6.5W (typ)
NETWORK
-
Interface Gigabit Ethernet, Dante digital audio
-
Link Speed 10/100/1000Mbps
-
Networking Addressing Capability DHCP or Manual IP address
-
Cable Length 100m (max)
-
Cable Type > Cat5e (shielded/unshielded)
-
Connector Type RJ45
-
Connector LED Status (Green) / Link Speed (Amber)
USER INTERFACE
- Display Type Monochrome FFSTN LCD
- Display Size 1.84 x 0.74” (46.7×18.8mm)
- Display Resolution 152 x 78 (78 ppi)
- LED Status Indication Power, Network Audio, Wireless (Red/Green/Amber)
- Reset Pushbutton for Network/Factory Reset
MECHANICAL
-
Dimensions 47.8mm x 242.5mm x 241.8mm (1.88” x 9.55” x9.52”)
-
Weight 1.15 kg
-
Color White / Gray
-
Material Molded Plastic, Die-casted Aluminum
-
Mounting Type Wall or ceiling bracket
ENVIRONMENTAL
-
Operating Temperature Range -7°C (19.4°F) to 49°C (120.2°F)
-
torage Temperature Range -29°C (-20.2°F) to 60°C (140°F)
-
Relative Humidity <95%